Aaron Hannon's Zoom Meeting - Shared screen with speaker view
Who can see your viewing activity?
Is blue lines not mean the most stable ? and red means the least stable
Does the negative x value mean drag? So ideally should it be closer to 0?
Can the CNC machine drill at the bottom? Like turn it upside down
if we send in the car body early, will you guys be able to tell us if its machinable, in case we miss something?
How do we export a machineable file from a inventor part?
Export your individual part files in STEP format :)
Go to File > Export to CAD Format
STEP or STL? I thought STL was mentioned before
how similar would the process be if you are using fusion 360
We may ask for both, but the process is the same!
How do we deal the 'block' at the front of the car after it gets CNC machined? do you have to snap it off?
yea the cam process in fusion 360
How would we attach the front wings onto the body of the car?
So we have to buy our own bearings + wheels?
My question is above
Can we use a non-cnc lathe to manufacture our wheels?
where can I find this recording?
once it’s posted
Would bigger or smaller bearings be better/have less resistance?
Once the car is finished, painted, assembled etc do we send it back to you?
are you able to manufacture a mounted wheel axel
whats the best wheel material?
does the car have to be built all in different pieces or can it be just one whole thing (excluding axles, wheels and co2 chamber)?
Approximately when will we receive the car to paint etc. Thanks :)
for testing purposes how would we open the gas cylinders
Is there a spec sheet available for the CO2 cylinder with stuff like dimensions, pressure, nozzle diameter, weight etc?
do the design file have to be formatted in step or stl
is there any info available on the coefficient of friction of the track surface?
Sorry I noticed that Omar’s team used an axel that did not go through the entire body it was a fixed axel attached to the side of the car. It is hard to explain
can we send in the wing designs to you and you make it separately out of a different material or do we have to go elsewhere?
and is your axel fixed Omar or did it move ?
How would you make sure the wheels are stuck to the axles?
As in make sure they don't come off
For wheel tips: https://www.youtube.com/watch?v=Y-oV_YkQDnE
Thanks very much
Thanks a lot
Thank you so much!!
thank you very much
Thanks a million!